Fusion 60-68 EPP Slope Soarer

This version is a Semi-Short kit. It does not include the 2x 3M77 Spray adheasive cans, 45metre Filament tape roll or 2x Vynal packing tape rolls. This kit is designed for customers who want to cover their Fusion with their own special material, such as Laminating film.

A 60" Fusioin has been years in the making and now it has finally arrived.

The Fusion 60-68 boasts a huge 68" wing witch can be cut down to 60" if you choose. Both the 60" & 68" gliders fly like a dream. The NEW Fusion features 1/4" Fiberglass rod main wing spars top and bottom of the wing running the full length of the wing, + a drag spar. The Fuselage has 4x 1/8" fiberglass rod spars, two run the full length of the fuselage. The NEW Fusion is a completely new design, It will fly fast and slow. During tests. The original coreflute was getting flutter around 100mph! so we upgraded to 5mm coreflute. At the end of a days sloping, when the wind fades and the lift drops the Fusion 68 will be the last plane in the air! thanks to its revolutionary airfoil.

What you get in the kit!

Fusion 68” Wing (1 Left, 1 Right)
Fusion Fuselage (Pre radiused)
Coreflute Tailplane (5mm thick)
Balsa Ailerons (9.0 x 45)
Polyurethane Glue 30ml (Gorilla Glue) (x3)
40 Grit Sanding Block
Wing Servo Cover No3 (x2)
Wing Servo Cover No1 (x2)
Push Rod Outer
Push Rod Inner
Fusion Instruction Manual
72" x 1/4" Fiberglas Spars (x2)
72" x 1/8" Fiberglas Fuselage Spars (x1.5)
Hardware Pack

Specifications:

Wing Span: 1727.2mm(68”)
Length: 900mm(35”)
Weight: 600g(45oz)
Airfoil: RW01-2840
Channels: 2-7 (Aileron, Elevator Flaps, or Crow)