Bela Trike and Paraglider Combo

Trike Specs:

Designed specifically for use with the Popular 2.15m Paraglider Parafoil. The Gondola is easy to put together and takes a variety of motor/esc/battery combinations and will surely be a model that will create conversations at your flying field.

Specs:
Height: 455mm
Fan Housing Diameter: 320mm
Length: 335mm
Weight: 711gram
Wheel Size: 75mm x 22mm
Motor: 35xx Brushless Outrunner (Required)
ESC: 40Amp (Required)
Battery: 11.1v 3S1P 4000mAh 20C Lipoly (Required)
Servo: 2 x Standard Servos (Required)

Required:
35xx Brushless Outrunner (Required)
40Amp (Required)
11.1v 3S1P 4000mAh 20C Lipoly (Required)
2 x Standard Servos (Required)
Your own Tx/Rx

Paraglider Specs:

Made from Porcher® UV proof paraglider ripstop nylon. The Paraglider Parachute is lightweight and rigid, just like the real thing! Its special design is modeled on a full size paraglider, with stiffer internal ribbing to keep the foil open in turns and at low speeds. This parafoil is a high quality item, built with care to ensure it will fly. You can build a powered or non powered gondola to fly with this parafoil. A typical power system is a 35-30 size motor with a 2200mAh 3S battery.

Width: 215cm
Length: 54cm
Weight: 190g
Material: (Ribs: Skytex 40, Cover: Skytex 27)

Porcher®, a registered trademark of Porcher Industries, France.
Important
Please take note of your foils angle-of-attack (AOA) when setting up your paraglider for its first flight. See the sub picture below for details. A parafoil takes work, patience and understanding to fly. Please dont expect you will be flying in 5 minutes of receiving the parcel. You must understand how parafoils work and most importantly, Angle Of Attack (AOA).
This foil will fly well with great glide performance when set up correctly with an appropriate gondola. See forums for more details.